This Isuzu arm kit will fit all Pup trucks from 1988-1995.  The kit includes a pair of Jeebus Joint upper control arms, that can be machined to fit either the Standard Isuzu taper or the common swap of Toyota spindle taper.  The lowers can also be ordered the same way with either the standard Isuzu spindle taper or the common Toyota spindle taper swap.  The arms are also narrowed .500 from stock width on each side to help clear your wheels and keep you rolling low and still turning!

The upper arms are widened 1.5″ at the joint end to help clear your air bag mounts.  They are designed to use the OEM Large cross shaft, but can be purchased with our CNC cross shafts as well for 199$ extra.  They have the ability to lay on a 22″ wheel and tire setup.

The lower arms are converted to a triangulated version, to eliminate the stock strut rod that keeps your truck from laying out.  You will need to provide tabs to weld onto the frame of your vehcile to support the open control arm bushing, you can make these OR if you send us your specs to how you want it, we will cut them for free, you just pay shipping.  There is a minimal amount of welding required to attach the brackets for this process to the frame.  You will need to trim the brackets to fit snugly against the frame, then weld in place.  

The kit ships in raw metal, un assembled so that you can coat as needed before install.  If you opt for powdercoat, i will also fully assemble the control arms for you, so you dont have to worry about putting them together.