The MMW Jeebus Joint upper and lower control arm packages are one of our most popular products. With these arms, you are able to lay your S-Seires truck of SUV our on anything up to a 30" OD wheel and tire package, and still get enough lift to be able to untuck your 24" wheels while being bodydropped. The arms are narrowed .500" from stock, and move the wheel forward in the wheel well by .500" as well.
These arms will fit all years 2wd S-Series trucks and SUVs. S-10, Sonoma, Jimmy, Blazer, Extreme. These arms also will fit some G-Body Cars.
With this control arm package, you will get the following
Jeebus Joint Upper Arm Pair
- Upper control arm pair with 23 more degrees travel vs. the nearest OEM ball joint brand.
- Graphite lined upper control arm bushings
- Sleeves to install with stock x-shaft
- Mounting hardware
V3 Lower Control Arm Pair
- Lower control arm pair
- Moog Ball Joints
- Graphite lined bushings
- Bolt Sleeves
- Shock mounts come standard, and are free! (note wheel size on check out page for placement)
- Lower bag mount incorporated into control arm.
Adding Powder coat to any of these options will get you a premium coating on your arms, as well as billet caps on your jeebus joints, with our M logo milled out of the cap. Adding our notchelss tie rods to this package will give you the ability to bolt these products to your vehcile, and require no cutting of your stock frame to lay out completely. Sway bar tabs are available by request., you will need to email us and provide mounting location for your needs. Raw Metal control arms will arrive with ONLY the Jeebus Joint installed completely but with no other bushings installed, so that you can coat them prior to assembly with your choice of paint or powder, and then fully assemble. Please make sure you use the proper lubrication on the inside AND outside of the bushing when installing, for a long squeek free life.
Jeebus Joint upper Control arms ordered powder coated, will arrive FULLLY ASSEMBLED ready for installation. Raw Metal control arms will arrive with ONLY the Jeebus Joint installed completely but with no other bushings installed, so that you can coat them prior to assembly with your choice of paint or powder, and then fully assemble. Please make sure you use the proper lubrication on the inside AND outside of the bushing when installing, for a long squeek free life.
These as well as all MMW control arms carry a lifetime warranty against weld and product failure, If there is even any kind of issue or problem with a MMW product we encourage to contact us directly via email, info@michiganmetalworks.com or by phone 989-750-2689. We pride ourselves in knowing that we are producing the highest quality suspension products we can offer, and that each of our orders is built with our customers specific application in mind, and all ways remember Michigan Metal Works is the ORIGINAL home of all of your flat plate control arm needs, other fly by night companies trying to match our look and design are just a poor imitation of the ORIGINAL.
