The 07+ Chevy / GMC 1500  Bumpsteer correction kit includes everything you need to install on your truck, and correct the bumpsteer and toe issues associated with bagged or drasticly lowered trucks.

Each kit contains the following

• (2) Thick chromoly body heim joints, fully teflon lined for long life and trouble free use.
• (2) Threaded adaptor sleeves.  Threaded RH & LH for easy adjustment, and flat spotted in the center for a wrench
• (4) Zinc plated chromoly alignment spacers
• (*) Complete Grade 8 hardware, with locking nuts.

We only use the best heim joints for this application, these are not cheap dollar store heims that get passed around in other kits, these are thick chromoly bodied heime that are teflon lined for long, noise free life.   Our center sleeves are also both RH & LH threaded for esae of installation, so you DO NOT need to drop the heim from the spindle to adjust.  The center sleeve also has a flat spot on the body for easy wrench adjustment, no need to use a pair of channel locks any longer.  Our kit uses straight G8 bolt hardware as pictured, it requies you to drill your spindle to fit the 5/8 bolt a small amount.  stock tie rods can still be installed at a later date if needed, you will not remove all the taper.